From 30679f8a57b16ff62e11dca8c708d1ddd89c358a Mon Sep 17 00:00:00 2001 From: Alejandro Garcia Date: Wed, 28 Oct 2026 14:02:30 -0700 Subject: [PATCH] arm64: dts: exynos: google: gs201-panther: enable the GPU Enable the Mali-G710 that gs201.dtsi describes, as the Pixel 7 Pro does. Its clock is the ACPM GPU clock, which this board already gets through acpm_ipc, and as on the Pixel 7 Pro there is no mali-supply: the G3D rails follow the PMU power domain and ACPM, and the bootloader leaves the GPU powered. Tested on a Pixel 7 from slot B (7.3.0-rc6), with the device package's rule that keeps the GPU powered: panthor probes the Mali-G710 (id 0xa862, shader_present 0x1110055), boots the CSF firmware (interface v1.5.0) and registers renderD128, and Hyprland renders on it through Mesa's panfrost ("Mali-G710 MC7 (Panfrost)") with no MMU faults or GPU resets. As on the Pixel 7 Pro, probe prints "no regulator (mali)" from the OPP core. Assisted-by: Claude Opus 5.5 Signed-off-by: Alejandro Garcia --- arch/arm64/boot/dts/exynos/google/gs201-panther.dts | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/exynos/google/gs201-panther.dts b/arch/arm64/boot/dts/exynos/google/gs201-panther.dts index d3e061a5b6..36dd97b492 100644 --- a/arch/arm64/boot/dts/exynos/google/gs201-panther.dts +++ b/arch/arm64/boot/dts/exynos/google/gs201-panther.dts @@ -4,8 +4,8 @@ * * USB (NCM + ACM), the cluster watchdogs from gs201.dtsi, a * simple-framebuffer on the buffer ABL leaves DPP0 scanning out, UFS, the - * three keys, and the touch rails on the main PMIC. The panel driver, - * touch and the GPU stay disabled. + * three keys, the touch rails on the main PMIC, and the GPU. The panel + * driver and touch stay disabled. */ /dts-v1/; @@ -149,6 +149,11 @@ }; }; +&gpu { + /* No mali-supply: the G3D rails follow the PMU power domain and ACPM. */ + status = "okay"; +}; + &usbdrd31_phy { status = "okay"; };