diff --git a/Documentation/devicetree/bindings/arm/google.yaml b/Documentation/devicetree/bindings/arm/google.yaml index d7b7eed970..a052732758 100644 --- a/Documentation/devicetree/bindings/arm/google.yaml +++ b/Documentation/devicetree/bindings/arm/google.yaml @@ -46,6 +46,7 @@ properties: - google,gs201-cheetah - google,gs201-felix - google,gs201-lynx + - google,gs201-panther - const: google,gs201 - description: Google Tensor G3 (zuma) boards items: diff --git a/arch/arm64/boot/dts/exynos/google/Makefile b/arch/arm64/boot/dts/exynos/google/Makefile index 0ecac5f36d..35e5867932 100644 --- a/arch/arm64/boot/dts/exynos/google/Makefile +++ b/arch/arm64/boot/dts/exynos/google/Makefile @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += \ gs201-cheetah.dtb \ gs201-felix.dtb \ gs201-lynx.dtb \ + gs201-panther.dtb \ zuma-husky.dtb # ABL applies board overlays, so keep symbols for labels @@ -14,4 +15,5 @@ DTC_FLAGS_gs101-raven += -@ DTC_FLAGS_gs201-cheetah += -@ DTC_FLAGS_gs201-felix += -@ DTC_FLAGS_gs201-lynx += -@ +DTC_FLAGS_gs201-panther += -@ DTC_FLAGS_zuma-husky += -@ diff --git a/arch/arm64/boot/dts/exynos/google/gs201-panther.dts b/arch/arm64/boot/dts/exynos/google/gs201-panther.dts new file mode 100644 index 0000000000..d3e061a5b6 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/google/gs201-panther.dts @@ -0,0 +1,167 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Google Pixel 7 (panther) - first-light board file. + * + * USB (NCM + ACM), the cluster watchdogs from gs201.dtsi, a + * simple-framebuffer on the buffer ABL leaves DPP0 scanning out, UFS, the + * three keys, and the touch rails on the main PMIC. The panel driver, + * touch and the GPU stay disabled. + */ + +/dts-v1/; + +#include +#include "gs201.dtsi" + +/ { + model = "Google Pixel 7"; + compatible = "google,gs201-panther", "google,gs201"; + + /* + * ABL's base-DTB match: product id 0x09855000 | major revision (B0 is + * 1). Stock reports pkg_mode 0 and soc_id 0x09855001 in its live tree. + */ + soc_id = <0x09855001 0x0>; + + chosen { + /* ABL requires bootargs to exist; it appends its own after these. */ + bootargs = "console=tty0 panic=10 clk_ignore_unused pd_ignore_unused rdinit=/init omamobile.ufs-probe"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + + /* + * ABL leaves DECON0 -> DSIM0 -> panel (sdc-s6e3fc3) running in + * command mode with DPP0 scanning 0xfac00000 (RDMA_BASEADDR_Y8, + * read on this phone). There is no panel driver, so no panel + * phandle; the size comes from this node. + */ + framebuffer0: framebuffer@fac00000 { + compatible = "simple-framebuffer"; + reg = <0x0 0xfac00000 (1080 * 2400 * 4)>; + memory-region = <&cont_splash_mem>; + width = <1080>; + height = <2400>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + }; + }; + + /* The same pins as cheetah's (Google's gs201-common.dtsi). */ + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&key_voldown>, <&key_volup>, <&key_power>; + pinctrl-names = "default"; + + button-vol-down { + label = "KEY_VOLUMEDOWN"; + linux,code = ; + gpios = <&gpa10 1 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + button-vol-up { + label = "KEY_VOLUMEUP"; + linux,code = ; + gpios = <&gpa8 5 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + /* + * PMIC_PWRON_OD_L: the S2MPG12 PWRONB line, also wired to the + * SoC. The PMIC's own long-press reset is unaffected. + */ + button-power { + label = "KEY_POWER"; + linux,code = ; + gpios = <&gpa10 0 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; + + /* + * UFS VCC. Stock drives it from GPIO gpp0-1 (boot-on), as on + * cheetah; there is no gs201 GPIO driver yet, so describe it as + * always on, as the bootloader leaves it. + */ + ufs_0_fixed_vcc_reg: regulator-ufs-vcc { + compatible = "regulator-fixed"; + regulator-name = "ufs-vcc"; + regulator-always-on; + regulator-boot-on; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <1>; + ranges; + + /* + * Stock's region and layout (ramoops_mem@fd3ff000 in its live + * tree), so a log from this kernel can be read after a warm + * reboot into slot A. + */ + ramoops@fd3ff000 { + compatible = "ramoops"; + reg = <0x0 0xfd3ff000 0x400000>; + console-size = <0x200000>; + pmsg-size = <0x200000>; + }; + + cont_splash_mem: splash@fac00000 { + reg = <0x0 0xfac00000 (1080 * 2400 * 4)>; + no-map; + }; + }; +}; + +&acpm_ipc { + /* + * Main PMIC, touch rails only. LDO25M is the touch controller's VDD + * and LDO26M its AVDD; nothing else on the stock board consumes + * them. Stock constrains them to 1.6-1.95 V and 2.5-3.0 V. The sub-PMIC + * is not described. + */ + pmic-1 { + compatible = "samsung,s2mpg12-pmic"; + interrupts = ; + google,vgpio2ap-sysreg = <&sysreg_vgpio2ap>; + wakeup-source; + status = "disabled"; + + regulators { + /* No voltage: the PMIC keeps the 1.8 V it holds. */ + ldo25m: ldo25m { + regulator-name = "vdd-ts"; + }; + + /* + * ABL leaves 3.3 V programmed, above stock's range; + * stock's regulator core lowers it to 3.0 V before + * the touch driver switches it on. + */ + ldo26m: ldo26m { + regulator-name = "avdd-ts"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + }; + }; +}; + +&usbdrd31_phy { + status = "okay"; +}; + +&usb_dwc3 { + status = "okay"; +}; + +&ufs_0 { + vcc-supply = <&ufs_0_fixed_vcc_reg>; + status = "okay"; +}; + +&ufs_0_phy { + status = "okay"; +};