diff --git a/README.md b/README.md index 795ec485..7f0e11aa 100644 --- a/README.md +++ b/README.md @@ -17,7 +17,7 @@ then deliver the report — all in one source-available, plugin-based platform f
-OpenTest FFT measurement workspace with a live waveform, several spectra and a waterfall chart +OpenTest main window running a sweep measurement, with the Setup channel panel, measurement settings, waveform, frequency response and impulse response charts, and the data selector @@ -30,7 +30,7 @@ Acoustic and vibration testing usually means one tool for live monitoring, anoth - **See the signal right away.** Connect a microphone, an accelerometer or a professional DAQ, open Monitor and watch waveforms, spectra and levels on every channel. - **Measure the way the standards ask.** FFT, octave (IEC 61260), sound level meter (IEC 61672), sound power (ISO 3744/3745/3746, GB/T 32524.1, GB/T 28543), sound quality, RT60 and more, each with its own parameter panel and results. - **Repeat it a thousand times a day.** Sequence mode turns "prepare → excite → acquire → analyze → judge → record" into a one-click flow with limits, barcode scanning, MES upload and UPH statistics. -- **Bring your own hardware.** CRYSOUND SonoDAQ works out of the box; sound cards, USB microphones and third-party DAQs connect through ASIO, WASAPI, openDAQ and NI-DAQmx device plugins. +- **Bring your own hardware.** CRYSOUND SonoDAQ works out of the box; sound cards, USB microphones and third-party DAQs connect through ASIO, WASAPI and openDAQ. - **Extend it yourself.** Business and device plugins add measurements and hardware without touching the core, and the AI-assisted OpenTest CLI lets agents drive the desktop. It is built for R&D engineers who need flexible analysis, quality teams who need standard-compliant numbers, and production lines that need a fast, repeatable pass/fail verdict. The free Community license covers personal use, education, research, and in-house R&D and production with up to 4 channels. @@ -130,7 +130,7 @@ Select test records on the **Report** page to generate a report from a general-p CRYSOUND measurement hardware: test station, acoustic camera, sound level meters, microphones and DAQ -Use OpenTest with CRYSOUND measurement devices out of the box, or bring in third-party hardware through audio interfaces, openDAQ and selected DAQ protocols. +Use OpenTest with CRYSOUND measurement devices out of the box, or bring in third-party hardware through audio interfaces and openDAQ. | Protocol | Verified | Supported | | :-- | :-- | :-- | @@ -138,7 +138,6 @@ Use OpenTest with CRYSOUND measurement devices out of the box, or bring in third | **ASIO** | CRYSOUND CRY6151B · Echo AIO System · RME Fireface UFX III | | | **WASAPI** | CRYSOUND CRY2301 noise sensor · miniDSP UMIK-1 · built-in sound cards | | | **Modbus-TCP** | CRYSOUND CRY2851 sound level meter | | -| **NI-DAQmx** | NI USB-4431 · NI cDAQ-9188 | NI cDAQ-9170 · NI cDAQ-9173 | Hardware support comes from device plugins, so it depends on the package you install. SonoDAQ adds PTP/GPS clock synchronization. Ordinary sound cards are fine for learning and early checks; use calibrated measurement hardware for formal results. The current list lives on the [website](https://www.opentest.com/). diff --git a/README.zh-CN.md b/README.zh-CN.md index b7d0187a..11062350 100644 --- a/README.zh-CN.md +++ b/README.zh-CN.md @@ -17,7 +17,7 @@ CRYSOUND 出品,源码开放,插件化扩展。
-OpenTest FFT 测量界面,包含实时波形、多张频谱图和瀑布图 +OpenTest 主界面正在进行扫频测量:左侧通道设置、测量参数、波形、频率响应和脉冲响应曲线,以及右侧数据选择器 @@ -30,7 +30,7 @@ CRYSOUND 出品,源码开放,插件化扩展。 - **接上就能看到信号。** 连接麦克风、加速度计或专业采集卡,打开实时监测(Monitor),每个通道的波形、频谱和电平都能实时看到。 - **按标准要求测量。** FFT、倍频程(IEC 61260)、声级计(IEC 61672)、声功率(ISO 3744/3745/3746、GB/T 32524.1、GB/T 28543)、声品质、RT60 等测量项,各有自己的参数界面和结果。 - **一天测上千台也不怕。** 序列模式把“准备 → 激励 → 采集 → 分析 → 判定 → 记录”编排成一键执行的流程,支持上下限判定、扫码、上传 MES 和 UPH 统计。 -- **硬件自由选。** CRYSOUND SonoDAQ 开箱即用;声卡、USB 麦克风和第三方采集设备可以通过 ASIO、WASAPI、openDAQ、NI-DAQmx 等设备插件接入。 +- **硬件自由选。** CRYSOUND SonoDAQ 开箱即用;声卡、USB 麦克风和第三方采集设备可以通过 ASIO、WASAPI 和 openDAQ 接入。 - **能力自己扩展。** 业务插件和设备插件可以增加测量项和硬件,不需要改动核心平台;AI 辅助的 OpenTest CLI 还能让智能体直接操作桌面端。 研发工程师可以用它做灵活的分析,质量团队可以用它拿到符合标准的数据,产线可以用它快速给出可重复的合格判定。免费的社区许可覆盖个人、教育、科研,以及企业内部的研发和生产使用(最多 4 个通道)。 @@ -130,7 +130,7 @@ pnpm package --platform windows # 打安装包(windows | mac | linux) CRYSOUND 测量硬件:测试工作站、声学相机、声级计、传声器和采集设备 -OpenTest 可以直接配合 CRYSOUND 测量设备使用,也可以通过音频接口、openDAQ 和部分采集卡协议接入第三方硬件。 +OpenTest 可以直接配合 CRYSOUND 测量设备使用,也可以通过音频接口和 openDAQ 接入第三方硬件。 | 协议 | 已验证 | 已支持 | | :-- | :-- | :-- | @@ -138,7 +138,6 @@ OpenTest 可以直接配合 CRYSOUND 测量设备使用,也可以通过音频 | **ASIO** | CRYSOUND CRY6151B · Echo AIO System · RME Fireface UFX III | | | **WASAPI** | CRYSOUND CRY2301 噪声传感器 · miniDSP UMIK-1 · 电脑内置声卡 | | | **Modbus-TCP** | CRYSOUND CRY2851 声级计 | | -| **NI-DAQmx** | NI USB-4431 · NI cDAQ-9188 | NI cDAQ-9170 · NI cDAQ-9173 | 硬件支持由设备插件提供,实际可用范围取决于你安装的版本。SonoDAQ 额外支持 PTP/GPS 时钟同步。普通声卡适合学习和初步验证,正式测量请使用经过校准的测量硬件。最新列表以[官网](https://www.opentest.com/zh-hans/)为准。 diff --git a/docs/assets/readme/fft-measure-workspace.png b/docs/assets/readme/fft-measure-workspace.png deleted file mode 100644 index 3ca036dd..00000000 Binary files a/docs/assets/readme/fft-measure-workspace.png and /dev/null differ diff --git a/docs/assets/readme/opentest-main-window.webp b/docs/assets/readme/opentest-main-window.webp new file mode 100644 index 00000000..28a14b6f Binary files /dev/null and b/docs/assets/readme/opentest-main-window.webp differ