diff --git a/case.md b/case.md index 3da05ae..021a0ed 100644 --- a/case.md +++ b/case.md @@ -1,3 +1,21 @@ +--- +Make: + AP Mount Top: + template: printing.md + stl-file: models/AP_Mount_for_1430New_v1.5_Top.stl + stlname: AP_Mount_for_1430New_v1.5_Top.stl + material: PLA + weight-qty: 40g + supports: "Yes" + AP Mount Bottom: + template: printing.md + stl-file: models/AP_Mount_for_1430New_v1.5_Top.stl + stlname: AP_Mount_for_1430New_v1.5_Top.stl + material: PLA + weight-qty: 40g + supports: "Yes" +--- + # Prepare the case {{BOM}} @@ -7,7 +25,7 @@ ## Construct the lid insert {pagestep} -* Join [AP Mount Top](fromstep){qty:1,cat:printed} and [AP Mount Bottom](fromstep){qty:1,cat:printed} together using two [M4x10mm countersunk screws]{qty: 2,cat: mech} and a [3mm Allen key](parts/metric_allen_keys.md){qty: 1,cat: tool} +* Join [AP Mount Top]{make, qty:1,cat:printed} and [AP Mount Bottom]{make, qty:1,cat:printed} together using two [M4x10mm countersunk screws]{qty: 2,cat: mech} and a [3mm Allen key](parts/metric_allen_keys.md){qty: 1,cat: tool} * Using three more [M4x10mm countersunk screws]{qty: 3,cat: mech} attach the brackets that came with your three UniFi Access Points to the holes just below the join between the two prints. ## Attach to case{pagestep} diff --git a/config.md b/config.md index 75f60b5..d60b748 100644 --- a/config.md +++ b/config.md @@ -1,18 +1,10 @@ # Your Nimble Configuration -You nimble configuration includes a [printed rack and shelf system](printing.md){step} +The nimble is a modular rack-and-shelf system. The first part of construction is to 3D print the custom parts, and then to assemble the shelves. -Your shelves from bottom to to are: +The shelves in your system are: -* Stuff shelf - This is where we bundle excess cables and dongles -* [Raspberry Pi shelf](pi_shelf.md){step} - For a raspberry pi computer. -* [SSD shelf](ssd_shelf.md){step} - For your storage drive -* [USB power shelf](usb_shelf.md){step} - To expose a number of USB ports for power -* [NUC shelf](nuctall_shelf.md){step} - For a tall NUC form factor computer -* [Netgate shelf](netgate_shelf.md){step} - For a Netgate 1100 firewall appliance -* [Switch shelf](switch_shelf.md){step} - For a UniFi flex switch -* [Patch panel](patch_panel.md){step} - To expose ports the back plane -* [omni-charge shelf](omnicharge_shelf.md){step} - For a portable power supply +{{listpages, tag:shelf}} Once you have assembled each shelf, you will [construct the rack](construction.md){step} and [prepare the case](case.md){step} before finally [wiring up the system](wiring.md){step} and [setting it up](setup.md){step}. diff --git a/construction.md b/construction.md index 487178a..efeae93 100644 --- a/construction.md +++ b/construction.md @@ -1,3 +1,25 @@ +--- +Make: + bottom: + template: printing.md + stl-file: models/bottom_v1.3.stl + stlname: bottom_v1.3.stl + material: PLA + weight-qty: 50g + rack legs: + template: printing.md + stl-file: models/Rack_Leg_21_Units.stl + stlname: Rack_Leg_21_Units.stl + material: PLA + weight-qty: 60g + stuff shelf: + template: printing.md + stl-file: models/Stuff_Shelf_1.0.stl + stlname: Stuff_Shelf_1.0.stl + material: PLA + weight-qty: 50g +--- + # Construct the and populate the rack {{BOM}} @@ -7,7 +29,7 @@ ## Attach the legs to the bottom{pagestep} -* Get the [bottom](fromstep){qty:1, cat:printed} and the four [rack legs](fromstep){qty:4, cat:printed} that you printed earlier. +* Get the [bottom]{make, qty:1, cat:printed} and the four [rack legs]{make, qty:4, cat:printed} that you printed earlier. * Get an [3mm Allen key](parts/metric_allen_keys.md){qty:1, cat:tool} ready * Use four [M4x10mm countersunk screws]{qty:4} to attach a leg to each corner of the bottom. @@ -16,14 +38,14 @@ ## Add the NUC and Netgate shelves {pagestep} -* Lightly screw two [M4x10mm cap screws]{qty:2, cat:mech} into the top two holes of the [Assembled NUC Shelf](fromstep){qty:1, cat: prev} until they first start to bite. +* Lightly screw two [M4x10mm cap screws]{qty:2, cat:mech} into the top two holes of the [Assembled NUC Shelf](nuctall_shelf.md){make, qty:1, cat: prev} until they first start to bite. * Check the screws are not protruding through the back of the shelf-front * Slide the shelf over the legs and down to the bottom of the rack * Don't tighten the screws up yet! ![](images/RackAssembly3.jpg) -* Repeat the same process with the [Assembled Netgate Shelf](fromstep){qty:1, cat: prev} and two more [screws][M4x10mm cap screws]{qty:2, cat:mech}. +* Repeat the same process with the [Assembled Netgate Shelf](netgate_shelf.md){make, qty:1, cat: prev} and two more [screws][M4x10mm cap screws]{qty:2, cat:mech}. ![](images/RackAssembly4.jpg) @@ -31,19 +53,19 @@ ## Mount the Omni on top of the rack {pagestep} -* Take the [Assembled Omni Shelf](fromstep){qty:1, cat: prev} and place it on top of the rack so the screen on the omni face the front of the rack. +* Take the [Assembled Omni Shelf](omnicharge_shelf.md){make, qty:1, cat: prev} and place it on top of the rack so the screen on the omni face the front of the rack. * Use four [M4x10mm countersunk screws]{qty:4} to attach the shelf to the four legs of the rack ![](images/RackAssembly6.jpg) ## Mount the Patch Panel and Switch {pagestep} -* Slide the [Assembled Patch panel](fromstep){qty:1, cat: prev} into the rack as high as it will go. +* Slide the [Assembled Patch panel](patch_panel.md){make, qty:1, cat: prev} into the rack as high as it will go. * Use two [M4x10mm cap screws]{qty:2, cat:mech} to secure it in place. ![](images/RackAssembly7.jpg) -* Now slide the [Assembled UniFi Switch Shelf](fromstep){qty:1, cat: prev} underneath the patch pannel. +* Now slide the [Assembled UniFi Switch Shelf](switch_shelf.md){make, qty:1, cat: prev} underneath the patch pannel. * Use two [M4x10mm cap screws]{qty:2, cat:mech} to secure it in place. ![](images/RackAssembly8.jpg) @@ -58,10 +80,10 @@ ## Insert the remaining shelves {pagestep} * Insert the final four shelves into the remain space in the following order (from top to bottom) - * [Assembled USB Power Shelf](fromstep){qty:1, cat: prev} - * [Assembled SSD shelf](fromstep){qty:1, cat: prev} - * [Assembled Raspberry Pi Shelf](fromstep){qty:1, cat: prev} - * [Stuff Shelf](fromstep){qty:1, cat: printed} + * [Assembled USB Power Shelf](usb_shelf.md){make, qty:1, cat: prev} + * [Assembled SSD shelf](ssd_shelf.md){make, qty:1, cat: prev} + * [Assembled Raspberry Pi Shelf](pi_shelf.md){make, qty:1, cat: prev} + * [Stuff Shelf]{make, qty:1, cat: printed} * Secure each in place with two [M4x10mm cap screws]{qty:8, cat:mech} ![](images/RackAssembly10.jpg) diff --git a/netgate_shelf.md b/netgate_shelf.md index eac6d37..cae9a3b 100644 --- a/netgate_shelf.md +++ b/netgate_shelf.md @@ -1,4 +1,17 @@ -# Assemble the Netgate 1100 Shelf +--- +Tags: shelf +Make: + Netgate Shelf: + template: printing.md + stl-file: models/SG-1100_Shelfv1.1.stl + stlname: SG-1100_Shelfv1.1.stl + material: PLA + weight-qty: 50g +--- + +# The Netgate 1100 Shelf + +## Assembling the Netgate 1100 Shelf {{BOM}} @@ -6,7 +19,7 @@ ## Prepare the tray {pagestep} -* Take the [Netgate Shelf](fromstep){qty:1, cat:printed} you printed earlier and a [2.5mm Allen key](parts/metric_allen_keys.md){qty:1, cat:tool}. +* Take the [Netgate Shelf]{make, qty:1, cat:printed} you printed earlier and a [2.5mm Allen key](parts/metric_allen_keys.md){qty:1, cat:tool}. * Lightly screw a [M3x12mm cap screw][M3x12mm cap screws]{qty:2} into the top hole of each of the two rear posts. * Make sure each screw is inserted less than half way. @@ -25,4 +38,3 @@ ![](images/Netgate4.jpg) -[Assembled Netgate Shelf]{output, qty:1, hidden} diff --git a/nuctall_shelf.md b/nuctall_shelf.md index b531c3c..380e671 100644 --- a/nuctall_shelf.md +++ b/nuctall_shelf.md @@ -1,4 +1,17 @@ -# Assemble the NUC computer shelf +--- +Tags: shelf +Make: + NUC Shelf: + template: printing.md + stl-file: models/Tall_NUC_Shelf_v1.2.stl + stlname: Tall_NUC_Shelf_v1.2.stl + material: PLA + weight-qty: 50g +--- + +# The NUC computer shelf + +## Assembling the NUC computer shelf {{BOM}} @@ -6,7 +19,7 @@ ## Position the computer{pagestep} -* Take the [NUC Shelf](fromstep){qty:1, cat:printed} you printed earlier +* Take the [NUC Shelf]{make, qty:1, cat:printed} you printed earlier * Position the [NUC computer](parts/NUC_Computer.md){qty:1, cat:net} on the shelf so that front of the computer sits just behind where the shelf narrows ![](images/NUC_shelf1.jpg) @@ -22,4 +35,3 @@ ![](images/NUC_shelf2.jpg) -[Assembled NUC Shelf]{output, qty:1, hidden} \ No newline at end of file diff --git a/omnicharge_shelf.md b/omnicharge_shelf.md index 6aec8ab..9fb0a41 100644 --- a/omnicharge_shelf.md +++ b/omnicharge_shelf.md @@ -1,5 +1,23 @@ -# Assemble the OmniCharge shelf - +--- +Tags: shelf +Make: + Omni Shelf: + template: printing.md + stl-file: models/Omni_20_v1.5.stl + stlname: Omni_20_v1.5.stl + material: PLA + weight-qty: 50g + Omni Shelf Lid: + template: printing.md + stl-file: models/Omni_20_Top_v1.5.stl + stlname: Omni_20_Top_v1.5.stl + material: PLA + weight-qty: 25g +--- + +# The OmniCharge shelf + +## Assembling the OmniCharge shelf {{BOM}} @@ -9,7 +27,7 @@ >i Note that this shelf forms the top of the rack, so looks a bit different. -* Take the [Omni Shelf](fromstep){qty:1, cat:printed} you printed earlier. +* Take the [Omni Shelf]{make, qty:1, cat:printed} you printed earlier. * Position the [Omni 20C+](parts/Omni20Cplus.md){qty:1, cat:net} so that the front of the device is not blocked ![](images/OmniShelfAssembly1.jpg) @@ -17,11 +35,10 @@ ## Secure the OmniCharge{pagestep} -* Take the [Omni Shelf Lid](fromstep){qty:1, cat:printed} you printed earlier and place it over the Omni, aligning the three countersunk holes with the holes on the shelf. +* Take the [Omni Shelf Lid]{make, qty:1, cat:printed} you printed earlier and place it over the Omni, aligning the three countersunk holes with the holes on the shelf. * Use three [M4x10mm countersunk screws]{qty:3} and an [3mm Allen key](parts/metric_allen_keys.md){qty:1, cat:tool} to secure the computer in place ![](images/OmniShelfAssembly3.jpg) ![](images/OmniShelfAssembly4.jpg) ![](images/OmniShelfAssembly5.jpg) -[Assembled Omni Shelf]{output, qty:1, hidden} diff --git a/3dprinter.md b/parts/3dprinter.md similarity index 100% rename from 3dprinter.md rename to parts/3dprinter.md diff --git a/patch_panel.md b/patch_panel.md index 33845b1..1b38461 100644 --- a/patch_panel.md +++ b/patch_panel.md @@ -1,5 +1,17 @@ -# Assemble the Patch Pannel +--- +Tags: shelf +Make: + Patch panel: + template: printing.md + stl-file: models/Keystone_Patch_Panel_2_Unitsv2.1.stl + stlname: Keystone_Patch_Panel_2_Unitsv2.1.stl + material: PLA + weight-qty: 50g +--- +# The Patch Pannel + +## Assembling the Patch Pannel {{BOM}} @@ -13,7 +25,7 @@ ## Attach the Ethernet Keystones{pagestep} -* Take the [Patch panel](fromstep){qty:1, cat:printed} you printed earlier and three [ethernet keystones][Ethernet Keystones](parts/EthernetKeystone.md){qty:3, cat:net} +* Take the [Patch panel]{make, qty:1, cat:printed} you printed earlier and three [ethernet keystones][Ethernet Keystones](parts/EthernetKeystone.md){qty:3, cat:net} * These will be clipped into the three left hand panels ![](images/Patch1.jpg) @@ -40,4 +52,3 @@ ![](images/Patch7.jpg) -[Assembled Patch panel]{output, qty:1, hidden} diff --git a/pi_shelf.md b/pi_shelf.md index d0238ba..05ac2a7 100644 --- a/pi_shelf.md +++ b/pi_shelf.md @@ -1,4 +1,17 @@ -# Assemble the Pi Shelf +--- +Tags: shelf +Make: + Raspberry Pi Shelf: + template: printing.md + stl-file: models/RPi_4B_Shelf_v1.3.stl + stlname: RPi_4B_Shelf_v1.3.stl + material: PLA + weight-qty: 50g +--- + +# The Pi Shelf + +## Assembling the Pi Shelf {{BOM}} @@ -6,7 +19,7 @@ ## Position the Raspberry Pi {pagestep} -* Take the [Raspberry Pi Shelf](fromstep){qty:1, cat:printed} you printed earlier +* Take the [Raspberry Pi Shelf]{make, qty:1, cat:printed} you printed earlier ![](images/PiShelfAssembly1.jpg) @@ -21,5 +34,3 @@ * Using four [M2.5x6mm cap screws]{qty:4} and a [2mm Allen key](parts/metric_allen_keys.md){qty:1, cat:tool}, secure the pi to the shelf. ![](images/PiShelfAssembly3.jpg) - -[Assembled Raspberry Pi Shelf]{output, qty:1, hidden} \ No newline at end of file diff --git a/printing.md b/printing.md index e8b369f..4077f27 100644 --- a/printing.md +++ b/printing.md @@ -2,30 +2,20 @@ {{BOM}} +[PLA]:parts/filament.md "{cat:consumable}" ## Print the custom components {pagestep} -You will need a [3d printer](3dprinter.md){qty:1, cat: tool} and about 1kg of [PLA filament](parts/filament.md){qty:1kg, cat:consumable}. - -Using the slicer that comes with your printer, print the following parts. Some require support. A brim is advised for all parts. - -|Name| STL file| Qty | Supports
Required?| -|---|---|---|---| -| [bottom]{output, qty:1}|[bottom_v1.3.stl](models/bottom_v1.3.stl){previewpage}|1|No| -| [rack legs]{output, qty:4}|[Rack_Leg_21_Units.stl](models/Rack_Leg_21_Units.stl){previewpage}|4|No| -| [Netgate Shelf]{output, qty:4}|[SG-1100_Shelfv1.1.stl](models/SG-1100_Shelfv1.1.stl){previewpage}|1|No| -| [NUC Shelf]{output, qty:4}|[Tall_NUC_Shelf_v1.2.stl](models/Tall_NUC_Shelf_v1.2.stl){previewpage}|1|No| -| [Omni Shelf]{output, qty:4}|[Omni_20_v1.5.stl](models/Omni_20_v1.5.stl){previewpage}|1|No| -| [Omni Shelf Lid]{output, qty:4}|[Omni_20_Top_v1.5.stl](models/Omni_20_Top_v1.5.stl){previewpage}|1|No| -| [Patch panel]{output, qty:4}|[Keystone_Patch_Panel_2_Unitsv2.1.stl](models/Keystone_Patch_Panel_2_Unitsv2.1.stl){previewpage}|1|No| -| [SSD shelf]{output, qty:4}|[Dual_SSD_Shelf-_v2.0.stl](models/Dual_SSD_Shelf-_v2.0.stl){previewpage}|1|No| -| [UniFi Switch Shelf]{output, qty:4}|[USW-Flex_Shelfv1.2.stl](models/USW-Flex_Shelfv1.2.stl){previewpage}|1|No| -| [USB Power Shelf]{output, qty:4}|[USB_Hub_Shelf_v1.2.stl](models/USB_Hub_Shelf_v1.2.stl){previewpage}|1|No| -| [Raspberry Pi Shelf]{output,qty:1}| [RPi_4B_Shelf_v1.3.stl](models/RPi_4B_Shelf_v1.3.stl){previewpage}{previewpage}|1|No| -| [Stuff Shelf]{output,qty:1}| [Stuff_Shelf_1.0.stl](models/Stuff_Shelf_1.0.stl){previewpage}|1|No| -| [Power Box]{output,qty:1}| [Power_Box_v1.3.stl](models/Power_Box_v1.3.stl){previewpage}|1|No| -| [AP Mount Top]{output,qty:1}| [AP_Mount_for_1430New_v1.5_Top.stl](models/AP_Mount_for_1430New_v1.5_Top.stl){previewpage}|1|Yes| -| [AP Mount Bottom]{output,qty:1}| [AP_Mount_for_1430New_v1.5_Bottom.stl](models/AP_Mount_for_1430New_v1.5_Bottom.stl){previewpage}|1|Yes| + +Using the slicer that comes with your [3d printer](parts/3dprinter.md){qty:1, cat: tool}, slice thent the following parts, and then print them. + +Some parts require support. A brim is advised for all parts. + + +| Qty | Item | Material | File | Supports
Required?| +|-----|------|----------|------|----------------------| +{{foreachmakeitem: "| {{qty}} | {{id}} | {{weight-qty}} of [{{material}}]{qty:{{weight-qty}}} | [{{stlname}}]({{stl-file}}){previewpage}|{{supports, default: No}}|"}} + You can [download all of the STLs as a single zipfile](all-stls.zip){zip, pattern:"*.stl"} diff --git a/ssd_shelf.md b/ssd_shelf.md index 75fc32e..ebc17dd 100644 --- a/ssd_shelf.md +++ b/ssd_shelf.md @@ -1,4 +1,17 @@ -# Assemble the SSD Shelf +--- +Tags: shelf +Make: + SSD shelf: + template: printing.md + stl-file: models/Dual_SSD_Shelf-_v2.0.stl + stlname: Dual_SSD_Shelf-_v2.0.stl + material: PLA + weight-qty: 50g +--- + +# The SSD Shelf + +## Assembling the SSD Shelf {{BOM}} @@ -6,7 +19,7 @@ ## Position the drives {pagestep} -* Take the [SSD shelf](fromstep){qty:1, cat:printed} you printed earlier +* Take the [SSD shelf]{make, qty:1, cat:printed} you printed earlier * Position two [2.5 inch SSD drives](parts/SSD.md){qty:2, cat:net} on the shelf so that the conectores are visible at the rear ![](images/SSDShelfAssembly1.jpg) @@ -17,5 +30,3 @@ * Lift the dive so that it aligns with the holes. Secure the screw with a [2.5mm Allen key](parts/metric_allen_keys.md){qty:1, cat:tool} ![](images/SSDShelfAssembly2.jpg) - -[Assembled SSD shelf]{output, qty:1, hidden} \ No newline at end of file diff --git a/switch_shelf.md b/switch_shelf.md index 49bbac7..a8674ba 100644 --- a/switch_shelf.md +++ b/switch_shelf.md @@ -1,4 +1,17 @@ -# Assemble the UniFi Flex Switch Shelf +--- +Tags: shelf +Make: + UniFi Switch Shelf: + template: printing.md + stl-file: models/USW-Flex_Shelfv1.2.stl + stlname: USW-Flex_Shelfv1.2.stl + material: PLA + weight-qty: 50g +--- + +# The UniFi Flex Switch Shelf + +## Assembling the UniFi Flex Switch Shelf {{BOM}} @@ -6,7 +19,7 @@ ## Prepare the tray {pagestep} -* Take the [UniFi Switch Shelf](fromstep){qty:1, cat:printed} you printed earlier and UniFi Switch Mounting Bracket (This should come with the switch) +* Take the [UniFi Switch Shelf]{make, qty:1, cat:printed} you printed earlier and UniFi Switch Mounting Bracket (This should come with the switch) * Place the bracket on the tray so that the extended flat raised section faced the front of the tray ![](images/UniFi_Flex_Switch1.jpg) @@ -26,5 +39,3 @@ ![](images/UniFi_Flex_Switch4.jpg) ![](images/UniFi_Flex_Switch5.jpg) ![](images/UniFi_Flex_Switch6.jpg) - -[Assembled UniFi Switch Shelf]{output, qty:1, hidden} \ No newline at end of file diff --git a/usb_shelf.md b/usb_shelf.md index 624c3d8..0382427 100644 --- a/usb_shelf.md +++ b/usb_shelf.md @@ -1,5 +1,17 @@ -# Assemble the USB Power Shelf +--- +Tags: shelf +Make: + USB Power Shelf: + template: printing.md + stl-file: models/USB_Hub_Shelf_v1.2.stl + stlname: USB_Hub_Shelf_v1.2.stl + material: PLA + weight-qty: 50g +--- +# The USB Power Shelf + +## Assembling the USB Power Shelf {{BOM}} @@ -7,7 +19,7 @@ ## Prepare the tray {pagestep} -* Take the [USB Power Shelf](fromstep){qty:1, cat:printed} you printed earlier and a [2.5mm Allen key](parts/metric_allen_keys.md){qty:1, cat:tool}. +* Take the [USB Power Shelf]{make, qty:1, cat:printed} you printed earlier and a [2.5mm Allen key](parts/metric_allen_keys.md){qty:1, cat:tool}. * Lightly screw a [M3x12mm cap screw][M3x12mm cap screws]{qty:4} into the top hole of each of the 4 side-posts. * Make sure each screw is inserted less than half way. @@ -24,5 +36,3 @@ *{warning} Do not over tighten the screws in this step as this may damage the plastic. ![](images/AnkerUSBPower3.jpg) - -[Assembled USB Power Shelf]{output, qty:1, hidden} \ No newline at end of file diff --git a/wiring.md b/wiring.md index 01916ea..6dc90e2 100644 --- a/wiring.md +++ b/wiring.md @@ -1,3 +1,13 @@ +--- +Make: + Power Box: + template: printing.md + stl-file: models/Power_Box_v1.3.stl + stlname: Power_Box_v1.3.stl + material: PLA + weight-qty: 60g +--- + # Wiring The Nimble >!! **TODO** @@ -9,6 +19,9 @@ {{BOM}} + +Once done must mention [Power Box]{make, qty:1,cat:printed} + ![](images/IMG_20210417_110410253_Large.jpg) ![](images/IMG_20210417_110531564_Large.jpg)