[Device] Aula SC900 Max

[isaac-btw]

Device type

Mouse

Device model

Aula SC900 Max

vendorId:productId

​093a:522c: Wired mode.
​372e:103e: CompX/FUDE 8000 Hz wireless MCU and 2.4 GHz dongle ID.

Connection type

2.4 GHz wireless receiver
Also can connected via wired.

What happens today?

Partially Works (some settings missing)
-I can only remap buttons. Other settings not working.
-With dongle(wireless) not reading to battery.

Diagnostics

No response

Can you help test?

Yes, and I can capture USB traffic (Wireshark / usbpcap)

Anything else?

Brand name is incorrect.

[isaac-btw]

-- | --
device |  
present | true
brand | "Incott"
name | "SC900MAX"
vendorId | 2362
productId | 21036
productName | "SC900MAX"
transport | "bridge"
connectionType | "Wireless"
pollingRateHz | null
supportedPollingRates |  
0 | 125
1 | 250
2 | 500
3 | 1000
4 | 2000
5 | 4000
6 | 8000
dpi | null
dpiStages | null
activeDpiStage | null
batteryPercent | null
batteryState | "Unknown"
firmware |  
0 | "Identity unavailable"
liftOffDistance | null
driverFamily | "incott"
deviceMode | null
collectionsSummary | "interfaces 0xFF00:0x0001, 0xFF05:0x0001, 0xFF01:0x0001, 0x0001:0x0006, 0x0001:0x0002, 0x000C:0x0001, 0x0001:0x0080"
signalStrength | null
receiverOnline | null
receiverRfId | null
pairingInProgress | false
results |  
0 |  
key | "connection"
label | "Device connected"
status | "pass"
detail | "Connected through OpenMouse Bridge"
1 |  
key | "interface"
label | "Control interface"
status | "pass"
detail | "interfaces 0xFF00:0x0001, 0xFF05:0x0001, 0xFF01:0x0001, 0x0001:0x0006, 0x0001:0x0002, 0x000C:0x0001, 0x0001:0x0080"
2 |  
key | "identity"
label | "Device identity"
status | "pass"
detail | "Incott SC900MAX"
3 |  
key | "driver"
label | "Driver identification"
status | "pass"
detail | "Incott incott"
4 |  
key | "dpi"
label | "DPI read-back"
status | "fail"
detail | "The sensor DPI was not read from the device."
5 |  
key | "pollingRead"
label | "Polling rate read-back"
status | "fail"
detail | "The polling rate was not read from the device."
6 |  
key | "battery"
label | "Battery read-back"
status | "skip"
detail | "Not reported by this device."
7 |  
key | "firmware"
label | "Firmware read-back"
status | "pass"
detail | "Identity unavailable"
8 |  
key | "liftOff"
label | "Lift-off read-back"
status | "skip"
detail | "Not reported by this device."
9 |  
key | "link"
label | "Wireless link (receiver)"
status | "pass"
detail | "driver read the wireless connection over the RF link"
10 |  
key | "flashRead"
label | "Flash / EEPROM read-back"
status | "fail"
detail | "a decoded flash field is missing or out of range."
11 |  
key | "brandDeviceIdentity"
label | "Incott device identity"
status | "pass"
detail | "model identified from the device reply (incott, FW Identity unavailable)"
12 |  
key | "sampling"
label | "Polling rate sampling"
status | "skip"
detail | "Not enough movement captured (needed ≥ 40 samples) — inconclusive."
13 |  
key | "flashWrite"
label | "Flash write round-trip"
status | "skip"
detail | "you have staged, unapplied changes — apply or revert them first."
verdict | "fail"
durationMs | 11850
runAt | "2026-10-31T01:20:03.640Z"
build | "BETA · v2.0.828"
supportedPage |  
listed | true
status | "supported"
label | "Supported"
matchedBy | "pid"
pageModel | "G23 V2 (SE / Pro)"
detail | "already listed as Supported on the supported-devices page — no update needed."