clear irq status error

[porya-zarei]

hello 👋,
I need help about sx1280 chip,
I have two lora32 sx1280 with pa and one gnicerf sx1280 module
two lora32 modules works fine with radiolib library
but gnicerf with sx1280 library that provided in lora-net repository not works in raspberry pi,
when I check irq status of chip after of going to the rx mode I get rx done and ... irqs but dio not change and there is no transmitter... and rx buffer len is zero.

[gaupen1186]

You can check sx128x_hal.c and your problem is most likely caused by sx128x_hal_read() and sx128x_hal_write() .
I used the repo without any problems and it worked perfectly.

[gaupen1186]

You can refer to my code. There are some Chinese notes, but I think it won't be a problem.
Good luck.
sx128x_hal.zip
Also, a logic analyzer mybe helpful. This is what I'm using.
https://www.dreamsourcelab.com/product/dslogic-series/

[porya-zarei]

You can refer to my code. There are some Chinese notes, but I think it won't be a problem. Good luck. sx128x_hal.zip Also, a logic analyzer mybe helpful. This is what I'm using. https://www.dreamsourcelab.com/product/dslogic-series/

Thank you, but if my HAL functions are wrong, why do they work fine in other cases?
my repo with sx128x_hal.c : sx128x-driver

[gaupen1186]

Sorry, I'm not familiar with linux.