hamlib support

[sq6emm]

Hey,

any chance to support hamlib in parallel to omnirig so its usable with wsjt-x on Linux?:)

[sq6emm]

This is like potential minimal set of commands that would need to be implemented:

dawszy@dawszy-ThinkPad-Z13-Gen-2:~$ rigctl -m2 -r 192.168.12.125:8006 -vvvvv
../../tests/rigctl.c(445) Startup: rigctl -m2 -r 192.168.12.125:8006 -vvvvv
rigctl Hamlib 4.5.5 Apr 05 11:43:08Z 2023 SHA=6eecd3
Report bugs to <hamlib-developer@lists.sourceforge.net>

rig_check_rig_caps: p1=0x70ed9088c260, p2=0x70ed908927e0, rig_model=0x70ed9088c260, macro_name=0x70ed908927e0
initrigs4_dummy: _init called
rig_init: rig_model=Hamlib NET rigctl
rig_init: rx_range_list1 is empty, using rx_range_list2
rig_init: rig does not have tx_range!!
netrigctl_init version 20230328.0
 1:rig.c(817):rig_open entered
rig_settings_get_path: path=/home/dawszy/.config/hamlib_settings
rig_settings_load_all: settings_file (/home/dawszy/.config/hamlib_settings): No such file or directory
rig_open: cwd=/home/dawszy
rig_open: /home/dawszy/hamlib_settings does not exist
rig_open: async_data_enable=1, async_data_supported=0
rig_open: using network address 192.168.12.125:8006
network_open: hoststr=192.168.12.125, portstr=8006
network_open: client port=32989
  2:rig.c(7481):async_data_handler_start entered
async_data_handler_start: async data support disabled since async_data_enabled=0
  2:rig.c(7488):async_data_handler_start returning(0) 
rig.c(254):add_opened_rig returning2(0) 
rig_open: 0x5e2c65aaf44c rs->comm_state==1?=1
  2:rig.c(6084):rig_get_powerstat entered
../../src/rig.c(6104) trace
netrigctl_get_powerstat called
netrigctl_transaction: called len=15
rig_flush: called for network device
network_flush called
write_block(): TX 15 bytes, method=2
0000    5c 67 65 74 5f 70 6f 77 65 72 73 74 61 74 0a        \get_powerstat. 
read_string_generic called, rxmax=1024 direct=1, expected_len=1
read_string_generic(): Timed out 10.010 seconds after 0 chars, direct=1
netrigctl_get_powerstat: PS command failed (ret=-5) so returning RIG_POWER_ON
  2:rig.c(6109):rig_get_powerstat returning(0) 
  2:netrigctl.c(261):netrigctl_open entered
netrigctl_transaction: called len=9
rig_flush: called for network device
network_flush called
write_block(): TX 9 bytes, method=2
0000    5c 63 68 6b 5f 76 66 6f 0a                          \chk_vfo.       
read_string_generic called, rxmax=1024 direct=1, expected_len=1
read_string_generic(): Timed out 10.010 seconds after 0 chars, direct=1
netrigctl_open: chk_vfo error: netrigctl_get_powerstat called
netrigctl_transaction: called len=15
rig_flush: called for network device
network_flush called
write_block(): TX 15 bytes, method=2
0000    5c 67 65 74 5f 70 6f 77 65 72 73 74 61 74 0a        \get_powerstat. 
read_string_generic called, rxmax=1024 direct=1, expected_len=1
read_string_generic(): Timed out 10.010 seconds after 0 chars, direct=1
netrigctl_get_powerstat: PS command failed (ret=-5) so returning RIG_POWER_ON
  2:rig.c(6109):rig_get_powerstat returning(0) 
  2:netrigctl.c(261):netrigctl_open entered
netrigctl_transaction: called len=9
rig_flush: called for network device
network_flush called
write_block(): TX 9 bytes, method=2
0000    5c 63 68 6b 5f 76 66 6f 0a                          \chk_vfo.       
read_string_generic called, rxmax=1024 direct=1, expected_len=1
read_string_generic(): Timed out 10.010 seconds after 0 chars, direct=1
Communication timed out
Communication timed out

netrigctl_open: vfo_mode=0
netrigctl_transaction: called len=12
rig_flush: called for network device
network_flush called
write_block(): TX 12 bytes, method=2
0000    5c 64 75 6d 70 5f 73 74 61 74 65 0a                 \dump_state.    
read_string_generic called, rxmax=1024 direct=1, expected_len=1
read_string_generic(): Timed out 10.010 seconds after 0 chars, direct=1
  2:netrigctl.c(299):netrigctl_open returning(-5) Communication timed out

  2:rig.c(7525):async_data_handler_stop entered
  2:rig.c(7555):async_data_handler_stop returning(0) 
network_close: close socket ret=0
 1:rig.c(1301):rig_open returning(-5) Communication timed out

rig_open: error = 192.168.12.125:8006 No such file or directory