diff --git a/docs/assets/m-1-wled-connect-to-wifi.webp b/docs/assets/m-1-wled-connect-to-wifi.webp new file mode 100644 index 0000000000..4cd0cd1aab Binary files /dev/null and b/docs/assets/m-1-wled-connect-to-wifi.webp differ diff --git a/docs/products/m1/setup/getting-started-m1.md b/docs/products/m1/setup/getting-started-m1.md index dd7ac39328..969e9d4e30 100644 --- a/docs/products/m1/setup/getting-started-m1.md +++ b/docs/products/m1/setup/getting-started-m1.md @@ -24,6 +24,8 @@ Your M-1 LED Matrix and M-1 controller were shipped separately to minimize damag 2\. On your phone or computer, look for the new Wi-Fi network called **Apollo M-1** and join it. Once connected, a "Welcome to WLED!" page should pop up, but if it does not that's ok. Either scan the QR code on the LED matrix or go to http://4.3.2.1/ in a browser such as Firefox, Chrome, or Safari. The Welcome to WLED page shows up. + ![](/assets/m-1-wled-connect-to-wifi.webp) + 3\. Tap **WIFI SETTINGS**, enter your network name and password, and tap **Save & Connect**. !!! tip "Set your mDNS address here too"